Konica Minolta 5430 DL User Manual

Select paper with high opacity for duplex (2-sided) printing. Opacity refers to 
how effectively paper blocks out what is written on the opposite side of the 
page. If the paper has low opacity (high translucency), then the printed data 
from one side of the page will show through to the other side. Check your 
application for margin information. For best results, print a small quantity to 
make sure the opacity is acceptable.
Duplex (2-sided) printing can be done manually or can be done automatically 
with the duplex option installed and selected.

“Media Specifications” on page 32 for supported sizes.

You should verify that the duplex option is physically installed on the printer to 
have the job duplex successfully. If the duplex option is not installed and 
duplex job is sent, the control panel will display 

DUPLEX UNIT NOT 

ATTACHED

.

Check your application to determine how to set your margins for duplex 
printing.
The following Duplex/Booklet settings are available.

If “Short Edge Binding” is selected, the pages will be laid 
out to flip at the top.

If “Long Edge Binding” is selected, the pages will be laid out 
to flip at the side.

1

3

1

2

1

1

1

1

1

2

3