jWIN jd-vd509 User Manual

www.jWIN.com

  

18 

 

After all the hardware connections are done, you can now connect the power cord of this unit 

and the attached devices. Please take a special caution while connecting the power cords to 

the outlet, and carefully read and follow the instructions in the user safety guide section in this 

manual while connecting power cords. After connecting the power cords, turn on this unit by 

pressing the [POWER] button on the main unit or the [STANDBY] button on the remote control. 

Also, turn on all the attached devices. This unit and all the attached devices must be 

appropriately set with the proper mode and channel settings based on your choice of 

connections. For the system setup of this unit, please read and follow the instructions below. 

For the system setup of the attached devices, please refer to their user’s manual. 

 

 

In the setup menu, there are 6 setup pages categorized as followings: SYSTEM, LANGUAGE, 

AUDIO, VIDEO, SPEAKER, and DIGITAL. Each setup page is composed of the several setup 

options corresponding to each category.  

1. 

Turn on the main unit by pressing the [POWER] button 

on the main unit or [STANDBY] button on the remote 

control if it is off. 

2. 

Press the [SETUP] button on the remote control. The 

setup menu will appear on your TV screen. 

3. 

Use the [

W /  S / T / X] buttons and the [ENTER] button 

on the remote control to navigate the setup menu. For an 

example, if you want to set the brightness level in the video setup page, press the [

X] 

button to highlight the video icon, and then press the [

T] button to select the 

“BRIGHTNESS” option. After that, press the [ENTER] or [

X] button to confirm your 

selection. By now, you can see the setting values of the brightness. Using the [

S / T] 

buttons, you can select the value you want and confirm the selected value by pressing the 

[ENTER] button. 

 

 

 

 

 

 

 

 

 

 

 

4. 

Select the “EXIT SETUP” option using the [

W / S / T / X] buttons, and then press the 

[ENTER] button to exit the setup menu. Or you can exit the setup menu by pressing the 

[SETUP] button. 

www.jWIN.com

  

19

 

The system setup menu is composed of the following setup options: TV SYSTEM, SCREEN 

SAVER, VIDEO, TV TYPE, and DEFAULT. 

 

1. 

TV SYSTEM: Used to set the video output according to your TV system. 

a. 

AUTO: When this option is selected, the video signal format will depend on the 

DVD recording format. If a DVD disc is recorded with the PAL TV format, this 

unit will automatically output the AV signal in the PAL format. To watch a movie 

correctly, your TV must support the PAL format. If a DVD disc is recorded with 

the NTSC TV format, this unit will automatically output the AV signal in the 

NTSC format. To watch a movie correctly, your TV must support the NTSC 

format. 

b. 

NTSC: When this option is selected, the video signal format will no longer 

depend on the disc format. Regardless of the DVD recording type, this unit will 

output the AV signal in the NTSC format. To watch a movie correctly, your TV 

must support the NTSC format. 

c. 

PAL: When this option is selected, the video signal format will no longer depend 

on the disc format. Regardless of the DVD recording type, this unit will output 

the AV signal in the PAL format. To watch a movie correctly, your TV must 

support the PAL format. There are several PAL types such as PAL-N, PAL-M, 

PAL-G, PAL-B, PAL-I, and so on. Thus, please check the technical 

specifications for which type of PAL your TV set supports. This unit supports 

PAL443 only.  

 

2. 

SCREEN SAVER: Used to protect the TV screen from the afterimage damage by the non-

moving image.  

a. 

ON: If it is set on, this unit will show the logo moving around on the screen when 

the system is idle for a certain time of period. 

b. 

OFF: If it is set off, this unit will not enter the screen saver mode even if the 

system is idle for a long time.