National Instruments NI USB-6009 User Manual
© National Instruments Corporation
11
NI USB-6008/6009 User Guide and Specifications
Setting Up the NI USB-6008/6009 Device
Complete the following steps to set up the NI USB-6008/6009:
1.
Install combicon screw terminal blocks by inserting them into the
combicon jacks.
combicon jacks.
2.
Figure 5 illustrates the signal labels that ship in the NI USB-6008/6009
kit. You can apply the signal labels to the screw terminal blocks for
easy signal identification.
kit. You can apply the signal labels to the screw terminal blocks for
easy signal identification.
Figure 5. NI USB-6008/6009 Signal Labels
3.
Refer to Table 4 and Figures 5 and 6 for signal label orientation and
affix the provided signal labels to the screw terminal blocks. Until the
signal labels are applied, you can insert the screw terminal blocks into
either of the combicon jacks.
affix the provided signal labels to the screw terminal blocks. Until the
signal labels are applied, you can insert the screw terminal blocks into
either of the combicon jacks.
1
Terminal Number Labels (Use Both Together)
2
Digital I/O Label
3
Single-Ended Signal Name Label (Use Either)
4
Differential Signal Name Label (Use Either)
ANALOG
DIGITAL
1
2
3
4