Chevrolet 2010 tahoe User Manual

Page of 614
Black plate (17,1)
Chevrolet Tahoe/Suburban Owner Manual - 2010
B. Coolant Surge Tank and Pressure Cap. See
C. Remote Positive (+) Terminal. See Jump Starting
E. Engine Oil Fill Cap. See “When to Add Engine Oil”
F. Automatic Transmission Dipstick. See “Checking
G. Remote Negative (−) Terminal (Out of View). See
H. Engine Oil Dipstick (Out of View). See “Checking
Engine Oil” under Engine Oil on page 6‑17.
I. Engine Cooling Fan. See Cooling System on
J. Power Steering Fluid Reservoir. See Power
K. Brake Master Cylinder Reservoir. See “Brake
Fluid” under Brakes on page 6‑42.
M. Windshield Washer Fluid Reservoir. See “Adding
Engine Oil
Checking Engine Oil
It is a good idea to check the engine oil level at each
fuel fill. In order to get an accurate reading, the oil must
be warm and the vehicle must be on level ground.
The engine oil dipstick handle is a yellow loop. See
Engine Compartment Overview on page 6‑16 for the
location of the engine oil dipstick.
1. Turn off the engine and give the oil several minutes
to drain back into the oil pan. If this is not done, the
oil dipstick might not show the actual level.
2. Pull out the dipstick and clean it with a paper towel
or cloth, then push it back in all the way. Remove it
again, keeping the tip down, and check the level.
6-17