Crestron pmk-15l User Manual

 

Pre-Construction Mount Kit: PMK-15L

 

The PMK-15L is a pre-construction mount kit for the 
Crestron Isys

®

 TPS-15L and TPS-15G-L wall mounted 

touchpanels. The PMK-15L can also be used with the Isys 
i/O™ TPMC-15-CH-L and TPMC-15-QM-L wall 
mounted touchpanels. The PMK-15L is used for 
installation on a stud. For custom touchpanel placement 
without a stud, use the WMKT-15L or the WMKM-15L. 
The PMK-15L includes an 18 AWG bus wire to secure 
touchpanel cabling prior to drywall installation and to 
avoid damaging the cables when the opening is routed. 
Refer to the physical views (bottom, side, and front) of 
the PMK-15L, shown after this paragraph. The table that 
follows lists all parts included with the PMK-15L.  

The PMK-15L consists of a single metal plate, which 
fastens to the stud of a framed wall prior to hanging 
drywall (shown after this paragraph). Standard drywall 
nails or screws to attach the PMK-15L are not supplied 
(length can vary). 

.

 

Use inside edge for cutting drywall

NOTE:  This mounting kit is to be used only with the 
TPS-15L, TPS-15G-L, TPMC-15-CH-L, and TPMC-15-
QM-L series of touchpanels. 

The plate is designed to provide the necessary support for 
a single touchpanel and can mount to the right or left side 
of a stud. Confirm that the PMK-15L is level before 
application of drywall. A rectangular opening with the 
dimensions shown in the illustration after this paragraph 
must be made in the drywall. Verify that the opening 
exposes the #6-32 tapped holes in each corner. 

FOR DRYWALL NAIL
(PROVIDED BY OTHER)

FOR DRYWALL SCREW
(PROVIDED BY OTHER)

SECURE 18 AWG BUS WIRE

IN NOTCH TO HANG CABLES

AWAY FROM DRYWALL

CUTTING TOOLS

FOR DRYWALL 
NAIL (PROVIDED
BY OTHER)

FOR DRYWALL NAIL (PROVIDED BY OTHER)

13.36 in

(33.93 cm)

0.03 in

(0.08 cm)

13.59 in

(34.53 cm)

1.31 in

(3.33 cm)

13.79 in

(35.02 cm)

15.75 in

(40.01 cm)

FOR DRYWALL SCREW (PROVIDED BY OTHER)

 

~13

7

64

 in

(333 mm Max)

DO NOT EXCEED

THIS DIMENSION

~12

61

64

 in

(329 mm Max)

~12

3

4

  in

(324 mm Max)

~

5

64

 in

(2 mm Max)

~

3

16

 in

(5 mm Max)

Ø ~

3

16

 in

(5 mm Max)

TYP (4X)

 ~6

13

64

 in

(158 mm Max)

 ~13

1

2

 in

(343 mm Max)

DO NOT EXCEED 

THIS DIMENSION

 ~3

21

32

 in

(93 mm Max)

 ~1

5

64

 in

(28 mm Max)

TYP (4X)

 

If the opening for the touchpanel in the drywall is too 
large, two pre-construction accessories are available to 
make adjustments. Use the optional TMK-15L (Trim 
Ring Kit) to provide a smooth edge at the opening. This 
option provides a finished appearance and is preferred 
when wallpaper is hung. Use the optional MMK-15L 
(Mud Ring Kit) to fill in larger irregularities around the 
opening (requires plastering).  

Metal, Plate, Mounting 

2012866

1

Metal, Plate,Cover 

2012865

1

Screw, #6-32, 1-1/2”L, Pan, Phil 

2007254

8

Jumper wire, 12”L, 18AWG, Black

2007838

1

 

Complete the installation by either installing the 
touchpanel, leaving the hole open (if permitted by local 
building codes), or installing the supplied cover plate with 
the included #6-32 x 1½” screws (shown after this 

 

 

15 Volvo Drive   Rockleigh, NJ 07647

 

Tel: 888.CRESTRON

   

Fax: 201.767.7576

Specifications subject to 

www.crestron.com

change without notice.