Crestron pmk-15l User Manual

Page of 2
Pre-Construction Mount Kit   
Crestron PMK-15L
 
2  
  Pre-Construction Mount Kit: PMK-15L 
Installation Guide – DOC. 6363 
paragraph). If the touchpanel is to be installed, refer to the 
latest revision of the TPS-12L/15L/17L Operations Guide 
(Doc. 6355), TPS-12G/15G-L Operations Guide (Doc. 
6356), or the TPMC-15/17-L Series Operations Guide 
(Doc. 6354) for installation instructions. 
Return and Warranty Policies 
Merchandise Returns / Repair Service 
1. 
No merchandise may be returned for credit, exchange, or 
service without prior authorization from CRESTRON. To 
obtain warranty service for CRESTRON products, contact 
the factory and request an RMA (Return Merchandise 
Authorization) number. Enclose a note specifying the nature 
of the problem, name and phone number of contact person, 
RMA number, and return address. 
Attaching Cover 
STUD
METAL COVER PLATE (2012865 SUPPLIED)
USED TO COVER CUTOUT IN THE DRYWALL
IF TOUCHPANEL IS NOT INSTALLED.
(IF REQUIRED BY LOCAL BUILDING CODES)
DRYWALL
(2012866) MUST BE LEVEL BEFORE
PRE-CONSTRUCTION PLATE
APPLICATION OF SHEET ROCK.
(2007254) QTY. 8
SCREW, #6-32, 1-1/2"L
PAN HEAD SCREW
 
2. 
Products may be returned for credit, exchange, or service 
with a CRESTRON Return Merchandise Authorization 
(RMA) number. Authorized returns must be shipped freight 
prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N.J., or 
its authorized subsidiaries, with RMA number clearly marked 
on the outside of all cartons. Shipments arriving freight 
collect or without an RMA number shall be subject to refusal. 
CRESTRON reserves the right in its sole and absolute 
discretion to charge a 15% restocking fee, plus shipping 
costs, on any products returned with an RMA. 
3. 
Return freight charges following repair of items under 
warranty shall be paid by CRESTRON, shipping by standard 
ground carrier. In the event repairs are found to be non-
warranty, return freight costs shall be paid by the purchaser. 
CRESTRON Limited Warranty 
CAUTION: Allow an air gap of at least 12 inches in the 
wall cavity above the touchpanel for heat dissipation. 
CRESTRON ELECTRONICS, Inc. warrants its products to be free from 
manufacturing defects in materials and workmanship under normal use 
for a period of three (3) years from the date of purchase from 
CRESTRON, with the following exceptions: disk drives and any other 
moving or rotating mechanical parts, pan/tilt heads and power supplies 
are covered for a period of one (1) year; touchscreen display and overlay 
components are covered for 90 days; batteries and incandescent lamps 
are not covered. 
NOTE: Prior to mounting the touchpanel, ensure that the 
PMK-15L is flush with the drywall (no kinks or bends in 
the metal). Any separation may make screwing in the 
touchpanel more difficult. One can purchase and attach a 
TMK-15L or an MMK-15L to keep the PMK-15L 
straight. 
This warranty extends to products purchased directly from CRESTRON 
or an authorized CRESTRON dealer. Purchasers should inquire of the 
dealer regarding the nature and extent of the dealer's warranty, if any. 
Further Inquiries 
CRESTRON shall not be liable to honor the terms of this warranty if the 
product has been used in any application other than that for which it was 
intended, or if it has been subjected to misuse, accidental damage, 
modification, or improper installation procedures. Furthermore, this 
warranty does not cover any product that has had the serial number 
altered, defaced, or removed. 
If you cannot locate specific information or have 
questions after reviewing this guide, please take 
advantage of Crestron's award winning customer service 
team by calling the Crestron corporate headquarters at  
1-888-CRESTRON [1-888-273-7876]. For assistance in 
your local time zone, refer to the Crestron website 
(www.crestron.com) for a listing of Crestron worldwide 
offices.  
This warranty shall be the sole and exclusive remedy to the original 
purchaser. In no event shall CRESTRON be liable for incidental or 
consequential damages of any kind (property or economic damages 
inclusive) arising from the sale or use of this equipment. CRESTRON is 
not liable for any claim made by a third party or made by the purchaser 
for a third party. 
You can also log onto the online help section of the 
Crestron website to ask questions about Crestron 
products. First-time users will need to establish a user 
account to fully benefit from all available features. 
CRESTRON shall, at its option, repair or replace any product found 
defective, without charge for parts or labor. Repaired or replaced 
equipment and parts supplied under this warranty shall be covered only 
by the unexpired portion of the warranty. 
Except as expressly set forth in this warranty, CRESTRON makes no 
other warranties, expressed or implied, nor authorizes any other party to 
offer any warranty, including any implied warranties of merchantability 
or fitness for a particular purpose. Any implied warranties that may be 
imposed by law are limited to the terms of this limited warranty. This 
warranty statement supercedes all previous warranties. 
As of the date of manufacture, the PMK-15L has been 
tested and found to comply with specifications for CE 
marking. 
 
 
Trademark Information 
All brand names, product names, and trademarks are the sole property of their respective 
owners. Windows is a registered trademark of Microsoft Corporation. Windows95/98/Me/XP 
and WindowsNT/2000 are trademarks of Microsoft Corporation.