DKS Enterprises 1803PC User Manual

This programming sequence will set the telephone entry system to dial out in either a touch-tone or 
rotary format.  Generally, this will be set for touch-tone.  
Factory setting = touch-tone. 
 

1. 

Press *07 and enter the four digit MASTER CODE _ _ _ _ (beep). 

2. 

Enter 0* (beep) for touch-tone or enter 1* (beep) for rotary. 

3. 

Press 0# TOGETHER to end this programming step (beeeeeep). 

 
 

This programming sequence sets which relay(s) will activate when the system receives a rotary-dial 9 
open command from a residents rotary telephone.  The system can be programmed so that only one 
relay will activate, or any combination of relays will activate.  HINT:  The relay that you designate as 
the primary relay should be programmed to activate from a rotary 9 command.  To cause a relay to 
activate, enter a 1 in it's respective character slot, or enter a 0 to not activate the relay.  Any 
combination of 1's or 0's is permissible.  For example, entering 010 in step 3 will cause only relay 0 to 
activate.  Entering 101 will cause both relay 0 and relay 2 to activate. 
Factory setting = 010. 
 

1. 

Press *51 and enter the four-digit MASTER CODE _ _ _ _ (beep). 

2. 

Enter the three-digit (1's or 0's only) rotary 9 code _ _ _ then press * (beep). 

3. 

Press 0# TOGETHER to end this programming step (beeeeeep). 

 
 
 

 

36