Clifford 590.4x User Manual

47

© 2011 Directed Electronics. All rights reserved.

Feature Details

Out of Range

Each time a command is performed the remote will expect a command 
response from the system. If a command response is not received the 

 screen and tone plays as an alert.

No Remote Output

Occasionally when a command is performed the remote may not 
generate a command response output or Out of Range output. This 
indicates that the system received the command but it was an incom-
plete command (e.g. AUX button press too short to activate the trunk 
release) or it was an illegal message (e.g. the command was cor-
rupted due to local RF interference). These are temporary normal func-
tions of the system and remote, perform the command again within 10 
seconds to return to normal operation.

Feature not Available

The 

 message is a generic one which varies in 

cause and solution depending upon the command used:

Command

Cause

Reason/Solution

Runtime Reset

Remote Start is Off

Only available when Remote Start is On

Sensor Bypass

System is not armed

Only available when system is armed

Defroster

Remote Start is Off.
Not configured for 
this.

Only available when Remote Start is On.
Only available when configured for 
Defroster control.

Car Select

Car 2 name tag is 
not set.
Car 1 or Car 2 is out 
of range.

Set Car 2 name tag to activate Car 2 
capability.
Move to within range .