Brother HL-2400CEN User Manual

USER’S GUIDE

2–18

 

 You can check print quality and print a list of available fonts before you
actually start working with the printer. To do so, follow these steps:
 

1.  Make sure that you have already installed the toner cartridges, the

OPC Belt Cartridge, the Oil Bottle and the Fuser Cleaner and have
loaded paper into the cassette. Make sure that you have removed the
protective parts on the Waste Toner Pack.

 
2.  Turn on the printer. Wait until the following message is displayed:

 

 LJ READY 001P T1
 AUTO

        

 

3. Press the 

 button to set the printer off-line.

 The 

 LED goes off.

 
4.  Hold down the 

 button and press the 

 button. Release both

buttons.

 
5. Press the ▲ or ▼ button to scroll through the display until the

desired message appears.

   Choose from one of the following selections:
 

 To Print  LCD Message
 the Demonstration Page 

 DEMO PAGE

 the Test Pattern 

 TEST PRINT

 the list of printer settings 

 PRINT CONFIG

 the list of internal or resident fonts 

 PRINT FONTS I

 the list of optional card fonts 

 PRINT FONTS C

 the list of permanent download fonts 

 PRINT FONTS P

 

 

To exit from the test mode, select “

exit

”.

 

 ✒  Notes
 The messages “PRINT FONTS C” or “PRINT FONTS P” appear only
when an optional font card is installed in the font slot or when permanent
download fonts are stored in printer memory.

• 

If the optional font card is installed, you can print  a list of optional 
fonts. Since the list shows the ID numbers specific to each optional
font, it helps you  select them with the 

 button. For more 

information, see 

• 

If user-defined characters are already downloaded into the printer
memory as permanent download fonts, you can print a list of them.
For more information, see