Netgear rangemax wn802t User Manual

Installation and Configuration

2-5

To select the local time zone:

1. Select Configuration > System > Basic > Time. The Time Settings screen displays. 

2. Configure the following information:

–

Time Zone. From the pull-down menu, select the local time zone for your wireless access 
point from a list of all available time zones. The default is Pacific Time (US-Canada).

–

Daylight Saving. This option is always disabled. The default is no adjustment.

Current Time. The AP gets the current time from its system clock, or an NTP server if 
this is enabled.

–

NTP Client. Enable NTP Client to synchronize the time of the access point with an NTP 
Server. The default is Enabled.

–

Use Custom NTP Server. Check the option if you have a custom NTP server. The default 
is Disabled.

–

Hostname/IP Address. Enter the host name or the IP address of the custom NTP server. 
The default is time-b.netgear.com

Note: You must have an Internet connection to get the current time from an NTP 

server.