Netgear rangemax wn802t User Manual

2-6

Installation and Configuration

3. .Click Apply to save your settings.

To configure the Basic LAN settings:

1. Select IP under Configuration on the main menu. The IP Settings screen displays (see 

).The default settings should be suitable for most users and environments.

2. Enter the IP Settings fields of the WN802T v2.

–

DHCP Client. By default, the Dynamic Host Configuration Protocol (DHCP) client is 
disabled. If you have a DHCP server on your LAN you can enable DHCP and the wireless 
access point will get its IP address, gateway and DNS server settings automatically when 
you connect the WN802T v2 to your LAN.

–

IP Address. Enter the IP Address of your wireless access point. The default IP address is 
192.168.0.233. To change it, enter an unused IP address from the address range used on 
your LAN; or enable DHCP.

–

IP Subnet Mask. Enter the subnet mask based on the IP address that you assign. The 
default is 255.255.255.0. 

–

Default Gateway. Enter the IP address of the gateway for your LAN. For more complex 
networks, enter the address of the router for the network segment to which the wireless 
access point is connected.