Netgear rangemax wn802t User Manual

4-8

Management

•

If the wireless access point is rebooted, the table data is lost until the wireless access point 
rediscovers the devices. 

The System screen, under the Monitoring tab provides a summary of the current WN802T v2 
configuration settings, including current IP and wireless settings. This information is read only, so 
any changes must be made on other screens.

To access the System screen:

Under the Monitoring tab, select System on the main menu to view the System screen, shown in 

. This screen shows the current values of parameters described in 

Note: A wireless network can include multiple wireless access points, all using the 

same network name (SSID). This extends the reach of the wireless network 
and lets users roam from one access point to another which provides seamless 
network connectivity. Under these circumstances, be aware that only the 
stations associated with this wireless access point will be presented in the 
Available Wireless Station List.

Access Point Name 

The default name may be changed, if desired.

MAC Address

Displays the Media Access Control (MAC) address of the wireless access 
point’s Ethernet port.

Country/Region

Displays the domain or region for which the wireless access point is 
licensed for use. It may not be legal to operate this wireless access point in 
a region other than one of those identified in this field.

Firmware Version

The version of the firmware currently installed.

Current Time

The current date and time in the time zone.