Netgear rangemax wn802t User Manual
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
Management
4-9
v1.0, September 2008
Viewing Network Traffic Statistics
The Statistics screen displays both wired and wireless interface network traffic.
Current IP Settings
IP Address
The IP address of the wireless access point.
Subnet Mask
The subnet mask for the wireless access point.
Default Gateway
The default gateway for the wireless access point communication.
DHCP Client
Enabled indicates that the current IP address was obtained from a DHCP
server on your network. Disabled indicated a static IP configuration.
server on your network. Disabled indicated a static IP configuration.
Current Wireless Settings for 802.11b/bg/ng
Access Point Mode
Identifies the operating mode of the WN802T v2: Standard Access Point,
Point to Multi-point bridge, or Repeater without wireless association
Point to Multi-point bridge, or Repeater without wireless association
Channel/Frequency
Identifies the channel the wireless port is using. 11 is the default channel
setting. (Channel frequencies used on each channel can be found in
“Wireless Communications”; a link to this article is in
setting. (Channel frequencies used on each channel can be found in
“Wireless Communications”; a link to this article is in
.
).
Figure 4-7 General system information
Table 4-1. System Information fields (continued)
Field
Description