Netgear rangemax wn802t User Manual

5-6

Advanced Wireless Bridging

To configure the WN802T v2 in wireless repeater mode:

1. Open a web browser and log in to the WN802T v2 using the addressing scheme you have set 

up.

2. Under the Configuration tab on the main menu, click Wireless Bridge. The Bridging and 

Repeating screen displays showing the default settings for the wireless access point (see 

3. Check the Enable Wireless Bridging and Repeating checkbox to enable wireless bridging 

and repeating.

4. Select the Repeater without Wireless Client Association radio button to enable this mode.

5. Down the left of the screen select the profile you want to add/edit, and click Edit.

6. The Edit Security Profile screen displays (see 

) in earlier section.

7. Enter a profile name or leave the default.

8. Enter the MAC (physical) address of the other bridge mode wireless access point in the 

Remote MAC Address field.

9. Under Authentication Settings select a Network Authentication type (one of the supported 

types —WEP, WPA-PSK, or WPA2-PSK should be used to protect the communication).