Netgear rangemax wn802t User Manual
Default Settings and Technical Specifications
A-1
v1.0, September 2008
Appendix A
Default Settings and Technical Specifications
This appendix provides the factory default settings and technical specifications for the NETGEAR
Wireless-N Access Point WN802T v2.
Wireless-N Access Point WN802T v2.
Factory Default Settings
You can use the Reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset.
defaults. This is called a hard reset.
•
To perform a hard reset, push and hold the Reset button for approximately 5 seconds (until the
Power LED changes from blinking green to solid amber). Your device will return to the
factory configuration settings shown in
Power LED changes from blinking green to solid amber). Your device will return to the
factory configuration settings shown in
.
•
Pressing the Reset button for a shorter period of time will simply cause your device to reboot.
Table A-1. Access Point Default Configuration Settings
Feature
Description
AP Login
User Login URL
192.168.0.233
User Name (case sensitive)
admin
Login Password (case sensitive)
password
Ethernet Connection
Ethernet MAC Address
See rear label.
Access Point Mode
On
Port Speed
10/100/1000 Mbps
Local Network (LAN)
Lan IP
192.168.0.233
Subnet Mask
255.255.255.0
Gateway Address
192.168.0.1