Konica Minolta bizhub pro 920 scan um 110 User Manual
Using the Network Scanner Features
7
bizhub PRO 920 Scanner
7-7
9
Configure the necessary items.
–
For more information on the con-
figurations on the Scanner Set-
ting Basic screen, refer to “About
the Scanner Setting Basic
Screen” on page 8-3.
figurations on the Scanner Set-
ting Basic screen, refer to “About
the Scanner Setting Basic
Screen” on page 8-3.
10
Set an original and press the [Start] button.
–
When attached to an E-Mail, the scanned data are sent to the
SMTP server.
SMTP server.
The original is scanned, and the scanned data are transmitted to an
specified destination.
specified destination.
11
To continue transmission, go back to
the step 9 and repeat the procedure.
To stop scanning, press [Address].
the step 9 and repeat the procedure.
To stop scanning, press [Address].
–
Then, the Select Destination/
Storage Locations screen re-
turns.
Storage Locations screen re-
turns.
–
When a lot of original is scanned, [Job Reserve] is indicated on the
screen during the scanning process.
screen during the scanning process.
–
You can press [Job Reserve] and set the next job. Immediately
upon completion of the previous job, you can set the original and
press the [Start] button.
upon completion of the previous job, you can set the original and
press the [Start] button.