Konica Minolta cn3101e um 1.1.0 User Manual

Job Management

CN3101e

8-3

If the Copy Track function is enabled in the copier, it is necessary to enter 
the access number before running a print cycle. For the procedure to set 
the management function using the access number on the copier side, 
see User Manual of the copier.

Select the “Job Management” tab.

Select “Access Code” and enter an access number (3 digits, 0 to 998) 
in “Access Number.”
A default value can be set and used for the access number instead of 
assigning one for each job.

Transmit a job.
When a division No. entered is a valid division No. of the copier, the 
job will be printed and counted for the division No. specified.

l If a job is transmitted without checking Access Code:

Select the “Device Option Setting” tab.

Transmit a job without checking Access Code.
The job is printed and counted under a division of the access number 
“999.” Report Types (Configuration, PCL Demo Page, and PCL Font 
List) and printing of a fax message received through Internet Fax are 
also counted under “999.”

l If a print job is transmitted by entering an access number that is illegal 

with the Copy Track function on the copier side:

The message “Job has been done improperly. Check the record.” 
appears on the copier control panel. At this time, the job is canceled.

Select “Job Log” – “Print Log” tabs on the copier control panel and 
check the history.