Konica Minolta cn3101e um 1.1.0 User Manual
Job Management
8
CN3101e
8-5
Lock Job
When Lock Job is set for printing, the copier will not start the print cycle
until the password entered when the print job is set up is entered on the
copier. It comes in handy for printing a confidential document.
until the password entered when the print job is set up is entered on the
copier. It comes in handy for printing a confidential document.
l Operation on the PC side:
1
Select the “Job Management” tab.
2
Select “Lock Job” from “Store Job.”
3
Type the password (4 digits, 0000 to 9999).
l Operation on the copier side:
The copier cancels the lock and starts a print cycle after a job has been
transmitted with Lock Job specified. For details, see User Manual of the
copier.
transmitted with Lock Job specified. For details, see User Manual of the
copier.
1
Touch “Job Control” – “Unlock Job” on the control panel to display a
list of locked jobs.
list of locked jobs.
2
From the list of locked jobs, select one to be unlocked. To unlock
more than one locked jobs, touch “Job” in succession.
more than one locked jobs, touch “Job” in succession.
3
Enter the 4-digit password for unlocking from the 10-Key Pad.
When press the password, the job disappears from the list of locked
jobs. This job will then be put in the status of “Waiting Print” and wait
for its turn.
When press the password, the job disappears from the list of locked
jobs. This job will then be put in the status of “Waiting Print” and wait
for its turn.
4
When the “Increase Priority” is touched, the job will be printed ahead
of others in the print queue. For details, see User Manual of the
copier.
The “Job Log” can be used to check the status of the job.
of others in the print queue. For details, see User Manual of the
copier.
The “Job Log” can be used to check the status of the job.