Konica Minolta cn3101e um 1.1.0 User Manual
Job Management
8
CN3101e
8-7
Store to HDD
When “Store to HDD” is set for a job, the job will be printed only after
certain steps have been taken. To print the job, call it from the hard disk
to the memory and cancel its status of “Job Stored.”
certain steps have been taken. To print the job, call it from the hard disk
to the memory and cancel its status of “Job Stored.”
The data held in the hard disk are not lost even when the power of the
copier is turned OFF. The copier must be mounted with an optional hard
disk.
copier is turned OFF. The copier must be mounted with an optional hard
disk.
l Operation on the PC Side:
1
Select the “Job Management” tab.
2
From the “Store Job” list, select “Store to HDD.”
l Operation on the copier side:
1
Touch “ Job Control” – “User Box” on the control panel to display the
job list held in the hard disk.
job list held in the hard disk.
2
From the job list held in the hard disk, select one to be called to the
memory and touch “Open Job”.
This job will be called to the memory and come into the status of “Job
Stored”.
memory and touch “Open Job”.
This job will be called to the memory and come into the status of “Job
Stored”.
3
Touch “Job Control” – “Scanned Job” on the control panel. Then
select a job from the stored job list displayed and touch “OK”.
select a job from the stored job list displayed and touch “OK”.
4
The job will be changed to the status of “Waiting Print” and wait for
its turn.
its turn.
5
When the “Increase Priority” is touched, the job will be printed ahead
of others in the print queue. For details, see User Manual of the
copier.
The “Job Log” can be used to check the status of the job.
of others in the print queue. For details, see User Manual of the
copier.
The “Job Log” can be used to check the status of the job.