Konica Minolta cn3101e um 1.1.0 User Manual
4
Settings Required for Network Printing
4-2
CN3101e
4.1
Network Connection That Can be Selected in Each
of Different Windows OSs
of Different Windows OSs
Different setting procedures apply depending on the output method
(LPR, Windows Printing, IPP).
(LPR, Windows Printing, IPP).
Select the connection scheme optimum for the operating environment.
4.2
To Make the Settings on the Controller Side
Network settings on the controller side may be made either from the
copier control panel or through PageScope Light used on a PC
connected to the network. Use of PageScope Light allows detailed
settings that cannot be made from the copier control panel to be made.
For the details of PageScope Light, see chapter 9.
copier control panel or through PageScope Light used on a PC
connected to the network. Use of PageScope Light allows detailed
settings that cannot be made from the copier control panel to be made.
For the details of PageScope Light, see chapter 9.
To use PageScope Light, it is necessary to first set the IP address by
following the procedure given below.
following the procedure given below.
IP Address Setting
1
On the control panel of the copier, select “Utility” – “Admin. Mode”
and then enter the password.
and then enter the password.
2
Select “Network set” – “Common Setting” – “TCP/IP” to open the
“TCP/IP” screen.
“TCP/IP” screen.
Windows
98,98SE
98,98SE
Windows
Me
Me
Windows
NT4.0
NT4.0
Windows
2000
2000
Windows
XP
XP
Protocol
Used
Used
LPR
m
m
m
TCP/IP
Windows
Printing
Printing
m
m
m
m
m
NetBEUI
IPP
m
m
TCP/IP