Konica Minolta cn3101e um 1.1.0 User Manual
Settings Required for Network Printing
4
CN3101e
4-3
3
Make the following settings:
m
IP Address:
Set the IP address of the controller.
Set the IP address of the controller.
m
Subnet Mask:
Set the subnet mask for the network to be connected.
Set the subnet mask for the network to be connected.
m
Default Gateway:
Set the default gateway address for the network to be connected.
Set the default gateway address for the network to be connected.
Check with the network administrator on these three items in
advance.
advance.
4
Turn OFF the Power Switch OFF of the copier.
Turn the Power Switch ON again, then the settings are effective.
Turn the Power Switch ON again, then the settings are effective.
Accessing PageScope Light
PageScope Light can be accessed directly using a Web browser.
1
Start the Web browser.
2
Type the IP address of the controller as follows in the address box
and press the Enter key.
and press the Enter key.
http://<controller IP address>/
E.g.: If the controller IP address is 172.16.0.100
http://172.16.0.100/
3
PageScope Light will appear.
For the details of PageScope Light, see chapter 9.