Intermatic 158wf12662ref User Manual

Page of 2
MAINTAINING CLEANLINESS AND LIFE OF WATERFALL & PUMP
1. Ensure water pump is kept clean and free of debris. We recommend
using distilled water with this product. 
NOTE: To clean pump, first make sure pump is UNPLUGGED 
from 120V circuit and remove front plate. After removing the 
front plate, the impeller holder must be removed. Remove the 
impeller from the pump and check for debris and/or dirt. Rinse 
impeller and pump under cold water. Reassemble.
2. Periodically change water and clean the structure of the waterfall 
with a mixture of vinegar and cold clean water. 
3. Add water to waterfall periodically to keep water level at an optimum 
level (approximately 1/2” above pump) to avoid shortening the life of 
the pump. Water level should completely cover pump at all times. 
NOTE: Never let the pump run dry. This will shorten the life of the pump.
4. To store waterfall after use, unplug the waterfall from the electrical outlet, empty the water, and store in a cool dry 
place.
TROUBLESHOOTING
1. If jets do not spray correctly, check water level and add if necessary or clean jet holes to unclog any deposits.
2. If pump fails to operate, check the circuit breaker, or try a different outlet to make sure the pump is getting electrical 
power.
3. If the pump gurgles, spews, or “burps”, check the water level to make sure the pump has enough water to function.
4. If water is splashing outside of the waterfall, adjust the flow control valve to a lower setting.
If within one (1) year from the date of purchase, this product fails due to a defect in material or workmanship, Intermatic Incorporated will
repair or replace it, at its sole option, free of charge. This warranty is extended to the original household purchaser only and is not
transferable. This warranty does not apply to: (a) damage to units caused by accident, dropping or abuse in handling, acts of God or any
negligent use; (b) units which have been subject to unauthorized repair, opened, taken apart or otherwise modified; (c) units not used in
accordance with instructions; (d) damages exceeding the cost of the product; (e) sealed lamps and/or lamp bulbs, LED’s and batteries; (f)
the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear; (g) transit damage,
initial installation costs, removal costs, or reinstallation costs.
INTERMATIC INCORPORATED WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES.  ALL
IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY MODIFIED TO EXIST ONLY AS CONTAINED IN THIS LIMITED WARRANTY, AND SHALL BE
OF THE SAME DURATION AS THE WARRANTY PERIOD STATED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON THE
DURATION OF AN IMPLIED WARRANTY, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
This warranty service is available by either (a) returning the product to the dealer from whom the unit was purchased, or (b) mailing the
product, along with proof of purchase, postage prepaid to the authorized service center listed below. This warranty is made by: Intermatic
Incorporated/After Sales Service/7777 Winn Rd., Spring Grove, Illinois 60081-9698/815-675-7000  http://www.intermatic.com   Please be
sure to wrap the product securely to avoid shipping damage.
LIMITED ONE YEAR WARRANTY
AUTHORIZED SERVICE CENTER  
/
CENTRO DE SERVICIO AUTORIZADO  
CENTRE DE SERVICE AGRÉÉ
Intermatic Incorporated
After Sales Service
7777 Winn Road
Spring Grove, IL 60081-9698
158WF12662
Motorhead
Impeller
Seal Ring
Impeller Holder
Front Plate
Regulator
Shaft
Suction Bracket