IronPort Systems ES-1528 User Manual

 Chapter 2 Hardware Installation and Connection

ES-1528 User’s Guide

2 Using a #2 Philips screwdriver, install the M3 flat head screws through the mounting 

bracket holes into the switch.

3 Repeat steps 

 and 

 to install the second mounting bracket on the other side of the 

switch.

4 You may now mount the switch on a rack.  Proceed to the next section.

1 Position a mounting bracket (that is already attached to the switch) on one side of the 

rack, lining up the two screw holes on the bracket with the screw holes on the side of the 
rack.  

Figure 7   Mounting the Switch on a Rack  

2 Using a #2 Philips screwdriver, install the M5 flat head screws through the mounting 

bracket holes into the rack. 

3 Repeat steps 

 and 

 to attach the second mounting bracket on the other side of the rack.