Lantronix 900-422 User Manual
Chapter 2: Introduction
XPress DR+ User Guide
17
You can associate the unit's serial channel (port) with a specific TCP/UDP port number.
Port number 9999 is reserved for access to the unit's Setup (configuration) Mode.
Port number 9999 is reserved for access to the unit's Setup (configuration) Mode.
Configuration Methods
After installation, the XPress DR+ requires configuration for the unit to operate correctly
on a network. There are three basic methods for logging into the XPress DR+ and editing
the configurable settings.
on a network. There are three basic methods for logging into the XPress DR+ and editing
the configurable settings.
DeviceInstaller
: Configures the IP address and other network settings on the XPress
DR+ using a Graphical User Interface (GUI) on a PC attached to a network.
(See
(See
Chapter 5: Using DeviceInstaller
.)
Web Manager
: Through a web interface, configures the XPress DR+ settings using the
Lantronix Web Manager. (See
Chapter 6: Configuration Using Web Manager
.)
Serial and Telnet Ports:
There are two approaches to accessing Setup Mode: making a
Telnet connection to the network port (9999) or connecting a terminal (or a PC running a
terminal emulation program) to the unit’s serial port. To use DeviceInstaller for
communication to an XPress DR+W over a wireless network, the WLAN network settings
must be configured first.
terminal emulation program) to the unit’s serial port. To use DeviceInstaller for
communication to an XPress DR+W over a wireless network, the WLAN network settings
must be configured first.