Navman la000508 User Manual

Page of 18
1
LA000507G © 2006 Navman New Zealand. All rights reserved. Proprietary information and specifications subject to change without notice.
9.0 Product handling
9.1 Packaging and delivery
Jupiter 20 modules are shipped in Tape and Reel form. The reeled modules are shipped with 
250 units per 300 x 44 mm (D x W) reel with a pitch of 32 mm. Each reel is ‘dry’ packaged and 
vacuum sealed in an MMB (Moisture Barrier Bag) with two silica gel packs and placed in a 
carton.
The MOQ (Minimum Order Quantity) for shipping is 250 units.
All packaging is ESD protective lined. Please follow the MSD and ESD handling instructions on 
the labels of the MMB and exterior carton (refer to sections 9.2 and 9.3).
9.2 Moisture sensitivity
The Jupiter 20 GPS receiver is an MSD (Moisture Sensitive Device). Precautionary measures 
are required in handling, storing and using such devices to avoid damage from moisture 
absorption. If localised heating is required to rework or repair the device, precautionary methods 
are required to avoid exposure to solder reflow temperatures that can result in performance 
degradation.
Further information can be obtained from the IPC/JEDEC standard J‑STD‑033: Handling, 
Packing, Shipping and Use of Moisture/Reflow Sensitive Surface Mount Devices.
9.3 ESD sensitivity
The Jupiter 20 GPS receiver contains class 1 devices and is ESDS (ElectroStatic Discharge 
Sensitive). Navman recommends the two basic principles of protecting ESDS devices from 
damage:
• Only handle sensitive components in an ESD Protected Area (EPA) under protected and 
controlled conditions
• Protect sensitive devices outside the EPA using ESD protective packaging
All personnel handling ESDS devices have the responsibility to be aware of the ESD threat to 
reliability of electronic products.
Further information can be obtained from the IEC Technical Report IEC61340‑5‑1 & 2: 
Protection of electronic devices from electrostatic phenomena.
9.4 Safety
Improper handling and use of the Jupiter GPS receiver can cause permanent damage to the 
receiver and may even result in personal injury.
9.5 RoHS compliance
This product complies with Directive 2002/95/EC on the restriction of the use of certain 
hazardous substances in electrical and electronic equipment.
9.6 Disposal
We recommend that this product should not be treated as household waste. For 
more detailed information about recycling of this product, please contact your local 
waste management authority or the reseller from who you purchased the product.