Nilfisk attix 751-2m User Manual

9

english

ATTIX 360-2M

ATTIX 550-2M / ATTIX 560-2MXC
ATTIX 751-2M / ATTIX 761-2MXC

1) 

Option depending on model

Before liquids are picked up, 
always remove the filter bag/
waste bag and check that the 
float (ATTIX 360-2M/550-2M/
751-2M) or the water level limit 
(ATTIX 560-2MXC/761-2MXC) 
works properly. (See section 
7.2.5 and 7.2.6 “Replacing the 
filter element“.)

The use of a separate filter ele-
ment or filter screen is recom-
mended.

If foam appears, stop work im-
mediately and empty the tank.

To reduce the amount of foam, 
use foam killer Nilfisk-Alto Foam 
Stop (see section 9.5 „Accesso-
ries“ for order number).
 

1. After picking up hazardous 

dust, vacuum clean the out-
side of the cleaner.

2.  Switch off the vacuum clean-

er and pull the mains plug 
out of the socket.

3.  Wind up the power cord and 

hang it on the handle.

4.  Empty the tank and clean the 

vacuum cleaner.

5.  After picking up liquids: Store 

the upper section of the 
cleaner separately so that 
the filter element can dry.

6. Store the vacuum cleaner 

in a dry room where it is 
protected from unauthorized 
use.