Nilfisk attix 751-2m User Manual

11

english

ATTIX 360-2M

ATTIX 550-2M / ATTIX 560-2MXC
ATTIX 751-2M / ATTIX 761-2MXC

1) 

Option depending on model

1.  Open the retaining clamps and 

remove the upper section of the 
cleaner from the dirt tank.

2.  Carefully remove the filter bag 

connection from the inlet fitting.

3.  Close the filter bag connection 

with the slide.

4.  Dispose of the filter bag in ac-

cordance with legal regulations.

5.  Place a new filter bag into the 

cleaned tank as described in the 
instructions (printed on the filter 
bag)

Press the filter 

bag connection on the inlet fit-
ting as far as possible.

1. Remove the upper section of 

cleaner from the dirt tank.

2.  Using one hand, take hold of the 

dirt tank underneath and tip out 
the dirt.

3.  Dispose of the dirt in accordance 

with legal regulations.

4.  Clean the rim of the tank before 

fitting the upper section of clea-
ner.

Before reinserting the suction hose:
5.  Clean the inlet fitting and hose 

collar.

1.  Remove the upper section of 

cleaner from the dirt tank.

2.  Open the retaining clamps 

(1) and remove the interme-
diate ring (2) from the tank.

3.  Pull the lever in the handle 

(3) upwards and tilt the tank.

4.  Tip out the collected dirt.
5.  Dispose of the dirt in accord-

ance with legal regulations.

or:
3.  Open the tank locks (4).
4.  Use the handles (5) to lift the 

tank out of the frame. 

5.  Tip out the collected dirt.
6.  Place the empty tank in the 

frame and close the locks 
(4).

7.  Dispose of the dirt in accord-

ance with legal regulations.