Konica Minolta micropress release 6 User Manual
8
Virtual Engine Defaults
Virtual Engine Defaults control the behavior of all jobs printed from a VE and can be overrid-
den by the workstation sending the job. The available defaults may vary by engine type.
Field/Control
Description
Spool Directory
The directory containing the PSM job files for the currently selected Virtual Engine. If
multiple Spool Directories are specified for the Virtual Engine, they may be selected
from the drop down lists.
To modify the Spool Directory:
Add Path
multiple Spool Directories are specified for the Virtual Engine, they may be selected
from the drop down lists.
To modify the Spool Directory:
Add Path
1 Click the Add Path button.
2 Navigate to the desired directory.
3 Click on the directory to select it.
4 Click OK to add the path.
2 Navigate to the desired directory.
3 Click on the directory to select it.
4 Click OK to add the path.
Delete Path
1 From the drop down list, select the path to delete.
2 Click the Delete Path button.
2 Click the Delete Path button.
Form Setup
Forms option is used to print data from one job as an overlay onto another job.
Custom PJL
(Printer Job Language)
(Printer Job Language)
(OPC VE) Permits advanced control of printer/finisher functionality. You must know
what commands the printer accepts; obtain this information from the manufacturer.
what commands the printer accepts; obtain this information from the manufacturer.
Hold Incoming Jobs
Holds all incoming jobs until they are manually selected to print.
Keep Printed Jobs
Saves jobs after printing.
Print Job Separators
Prints a marked separator page at the end of each job.
Use Manual Tray for Separators
Keeps paper for Separators in the Manual Tray. Select this option to use paper of a
different size and/or color for Job and/or Copy Separators. If you do not select this
option, the system checks the manual tray first. If no paper is loaded into the manual
tray, the currently selected input tray is used. Note: This does not apply to a duplex job
on a PrintStation 312 because it would use one of the pages from the job as a
separator; therefore, the separator will have to come from the manual tray.
different size and/or color for Job and/or Copy Separators. If you do not select this
option, the system checks the manual tray first. If no paper is loaded into the manual
tray, the currently selected input tray is used. Note: This does not apply to a duplex job
on a PrintStation 312 because it would use one of the pages from the job as a
separator; therefore, the separator will have to come from the manual tray.
Write Through
Allows an incoming job to print as the RIP is processing it. Note: If Write Through is
selected and a job starts coming in, the PSM will use only one PrintStation of a Virtual
Engine to print until the entire job has been received. This guarantees correct collation.
For the LaserJet 8000, if Stapling is enabled, Write Through will be ignored.
selected and a job starts coming in, the PSM will use only one PrintStation of a Virtual
Engine to print until the entire job has been received. This guarantees correct collation.
For the LaserJet 8000, if Stapling is enabled, Write Through will be ignored.
Delete Color Pages
When enabled, will delete color pages from jobs coming into the VE. Black and White
pages will be retained.
pages will be retained.
Print Color Pages Only
For color engines – enable to print only the color pages in a job.
Print Color Inserts
For Black and White engines – enable to put an insert sheet in place of a color page.
Step and Repeat
Enables placing copies of a page across the width of the media as many times as
possible.
possible.
SafePrint
Determines whether a page or job can be printed on the media remaining.
Print Quality
Chooses the appropriate balance of print speed vs. quality. See Output Options.
Margin Offsets
Changes the margin size and expands the print area of the page reducing the amount
of media waste.
of media waste.