Konica Minolta micropress release 6 User Manual
11
2 Select Virtual Engine
ÎTRueColor from the menu.
Note: A Key Code is necessary to activate the optional functionality of TRueColor. Contact your MicroPress
dealer for more information.
dealer for more information.
B&W Engine Balance
B&W Engine Balance sends the MonoTune test target to the output devices connected to
the currently selected VE.
1 Select the Virtual Engine.
2 Select Virtual Engine
2 Select Virtual Engine
ÎB&W Engine Balance from the menu.
3 Follow the directions on the test target to make adjustments to the PrintStation.
Job
The Job Menu Bar gives immediate access to fre-
quently used commands.
Info...
The Job Information dialog consists of several tab pages displaying setup options for Job
Settings, Page Settings, job parsing, etc. The dialog’s title bar displays the job name and file
size. Selections may vary based on engine type. This section describes each page.
• Job Settings: displays information about the whole job. You can view or change many
global job settings.
Note: When bit depth or job resolution is identical in either the horizontal or vertical direction for any page in the
job, the exact resolution will be displayed. If it differs in either direction for all pages in the job, an asterisk displays
beside the resolution number. When both directions differ, two asterisks will display instead of a number in the title
bar. To view the individual resolution of each page, see the Page Settings tab.
job, the exact resolution will be displayed. If it differs in either direction for all pages in the job, an asterisk displays
beside the resolution number. When both directions differ, two asterisks will display instead of a number in the title
bar. To view the individual resolution of each page, see the Page Settings tab.
• Output Options: displays various printing options.
• Finishing Options: finishing options vary depending on the output device. Options
may include Folding, Punching, Stapling, etc.
• Brightness/Contrast: options for adjusting Image brightness and contrast for the job.
• Color Adjust: controls for setting C, M, and Y levels, and for choosing a ColorCurve
Calibration Set.
• Parsing: displays a graphic depicting how the job is parsed and how to combine the
output of each PrintStation for a collation.
• Annotations: options for adding/viewing comments.
.
• Finishing Setup, Finishing Settings, Finishing Summary: configures functionality
for the finisher.