Konica Minolta micropress release 6 User Manual
12
• Page Range Settings: set and view settings, such as Media Types, Feed Trays, Paper
Sizes, and Subset Stapling for pages and groups of pages within a job.
.
To open the Info window:
1 Select a job from the Job List Window of the active VE.
2 Select Job
2 Select Job
ÎInfo from the menu.
Note: Click Reparse only if something changes on the Job Settings (e.g., number of copies, available print
engines).
engines).
Job Information dialogs may vary based on PrintStation/PrintLink type. Two types of mes-
sages may be displayed: Warnings (yellow!) and Errors (red!). Warning message jobs will
print, though perhaps with undesirable results. A job with an Error message will not print.
Attempting to do so will immediately puts the job in an error state.
Job Settings
Job Settings
Use the Job Settings tab to set up print options (i.e., number of copies, job name). The docu-
ment paper size is also displayed but cannot be changed because it is set in the generating
application.
Note: Paper sizes B1
–
B6 referred to in this manual are JIS unless otherwise noted.
Finishing Options
This dialog displays the available features if Finishing is available and will vary depending on
engine/finisher type. Some features may become unavailable when other features are
selected. This is to ensure proper operation of the engine/finisher.
Note: A job containing both long edge feed landscape and any orientation short edge feed may require that the
long edge feed be tumbled.
long edge feed be tumbled.
Field/Control
Description
Copies
Number of copies to print.
Print Range
• All Pages - Prints every page in the job.
• Page Range - Prints specific pages in the job.
• Chapters - Prints the selected chapters.
• Odd + Even - Prints odd AND even pages for the specified range.
• Odd - Prints odd pages only.
• Even - Prints even pages only.
• Page Range - Prints specific pages in the job.
• Chapters - Prints the selected chapters.
• Odd + Even - Prints odd AND even pages for the specified range.
• Odd - Prints odd pages only.
• Even - Prints even pages only.
Reverse Order
Causes job to print in the opposite order. For the 040, Reverse Order is not available if
Duplex (Output Options) is on.
Duplex (Output Options) is on.
Job Name
Current job name (can modified directly).
User Name
Network name of the workstation that sent the job. “NoName” displays if user name is not
indicated in the print job.
indicated in the print job.
Paper
Paper size for the job.
Calculate Toner Coverages
Click Calculate in the Toner panel of the Job Settings or Page Settings tab to calculate the
toner coverage on all pages of selected job. Note: Selected paper size in the workstation
application may not match the paper size in the feed tray if Auto Select (Output Options,
Engine Defaults) is not on. If this happens, the job will print anyway.
toner coverage on all pages of selected job. Note: Selected paper size in the workstation
application may not match the paper size in the feed tray if Auto Select (Output Options,
Engine Defaults) is not on. If this happens, the job will print anyway.