Konica Minolta micropress release 6 User Manual
45
Summary
The PrintStation Status Summary dialog displays the status of the PrintStation (e.g., errors
and other specific information). To display PrintStation Status Summary information:
On the active VE, click PrintStation button to view the Printer Status Summary information.
On the active VE, click PrintStation button to view the Printer Status Summary information.
Note:
For some engine types, various status indicators will display in gray when in a normal state. A sta-
tus will display in yellow or red when conditions require attention.
PrintLink 062:
If a paper input is opened, whether paper is added/removed or not, the status displaying paper quantity
will be lost. The status will be updated to the correct position the next time a job is printed and picks paper
from that input tray.
will be lost. The status will be updated to the correct position the next time a job is printed and picks paper
from that input tray.
The table below describes conditions in the Printer Status Summary dialog box.
Field/Control
Description
Paper Status
Paper source, paper size, and sheets remaining. A green light indicating the current default
tray displays for some engines.
tray displays for some engines.
Manual Tray
Sets paper size (and thickness, for some engines) in the manual tray.
PrintLink Cii:
Fuser speed is adjusted according to paper thickness to assure proper fusing of the toner.
PrintLink Cii:
Fuser speed is adjusted according to paper thickness to assure proper fusing of the toner.
• Normal = fastest
• Transparency = faster than Heavy
• Heavy = slowest
• Transparency = faster than Heavy
• Heavy = slowest
Notes:
PrintStation 024, PrintLink Cii:
If the Manual Tray is used as a source, this field must be correctly set to the exact size in
the Manual Feed Tray. If it does not match, the imaging could become “out-of-sync” with the
paper.
PrintStation 024, PrintLink Cii:
If the Manual Tray is used as a source, this field must be correctly set to the exact size in
the Manual Feed Tray. If it does not match, the imaging could become “out-of-sync” with the
paper.
PrintStation LaserJet 5Si:
If the paper size is set for the Manual tray in the PSM, the paper size must also be set on
the PrintStation LaserJet 5Si by using the front panel.
DesignJet CP, DesignJet 1000:
DesignJet CP's or DesignJet 1000s within a Virtual Engine must have the same size paper
loaded.
the PrintStation LaserJet 5Si by using the front panel.
DesignJet CP, DesignJet 1000:
DesignJet CP's or DesignJet 1000s within a Virtual Engine must have the same size paper
loaded.
Empty Tray Switch Skips
This drop-down list allows you to select a tray that is not to be switched into when a job runs
out of paper.
out of paper.
Density Adjust
Current density setting of the PrintStation. Use this setting to set density level ranging from
light to dark.
light to dark.
Error on Toner Low
Selecting this option will cause the engine to stop printing when the toner is empty rather
than displaying a warning and continuing to print.
than displaying a warning and continuing to print.
Selected Output
Output Destination displayed here is selected from the Job Settings page.
Status Summary
Detailed information about the printer.
Paper Status
Displays paper size, Ready, or Low.
Pause
Interrupts a printing job to use the Copy function of the PrintLink Cii.
Gamma Calibration
Color capable PrintStations must be color calibrated in order to ensure consistent results
and balance color densities across multiple PrintStations. Gammatic, part of the TRueColor
option toolbox, is an automatic calibration system that measures 21 steps per color on all
PrintStations to ensure color consistency. For more information, see
and balance color densities across multiple PrintStations. Gammatic, part of the TRueColor
option toolbox, is an automatic calibration system that measures 21 steps per color on all
PrintStations to ensure color consistency. For more information, see
TRueColor User
Guide
.
Toner
State of the Cyan, Magenta, Yellow, and Black toner or ink cartridges. Color capable
PrintStations only.
PrintStations only.
Toner Cartridge eject
Handle
Pulling
Handle
Pulling
The Toner Cartridge Ejection Handle is not fully engaged.