Konica Minolta ip-432 User Manual
86
II Printer Chapter 5 Printing Problems
5-1. Problems with Printing
No response to printer commands.
Check the following, in order.
1
Check that the [Konica IP-432] is selected as the printer.
2
Check that the main body power is switched On.
3
Print a [Test page].
If you can print a test page, but jobs from the computer cannot be printed, notifying the system admin-
istrator or service representative.
istrator or service representative.
The paper type cannot be selected.
Check the following, in order.
1
Click the [Paper] tab and [Cover] tab [Restore Defaults] button to restore the settings
to default state.
to default state.
2
Select the paper tray containing the paper to print as the [Paper Source].
Test page cannot be printed.
Check the following, in order.
1
Check the copier control panel LCD screen.
If [Ready to Copy] is displayed, proceed to Step 3.
If a diagnostics message or error message is displayed, refer to the copier user’s manual.
If nothing at all is displayed, proceed to Step 2.
If a diagnostics message or error message is displayed, refer to the copier user’s manual.
If nothing at all is displayed, proceed to Step 2.
2
Press the sub power switch on the control panel.
If the copier is in auto shut-off mode, pressing this switch puts the LCD screen into display mode.
3
Check that copying is possible.
If copying is possible, proceed to Step 4.
4
Switch off the copier’s main power, then restart it. Once the print controller can be
used, print a test page again.
used, print a test page again.