Xerox 4213 User Manual
INTERFACES
Centronics connector
The Centronics interface uses an Amphenol 36-pin connector,
#57-40360 or equivalent. This connector mates with an
Amphenol #57-30360 or equivalent connector and is illustrated
in figure 1-1. Centronics compatible Epson type interfaces for
personal computers can also be used on the 4213. A standard
female Centronics cable connection is supplied. The signals
associated with each pin are described in Table 1-2. on the
following page. Figure 1-1 shows the Centronics interface
connector.
#57-40360 or equivalent. This connector mates with an
Amphenol #57-30360 or equivalent connector and is illustrated
in figure 1-1. Centronics compatible Epson type interfaces for
personal computers can also be used on the 4213. A standard
female Centronics cable connection is supplied. The signals
associated with each pin are described in Table 1-2. on the
following page. Figure 1-1 shows the Centronics interface
connector.
Figure 1-1.
Centronics interface connector
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE
1-3