ICOM f70t User Manual
17
3
BASIC OPERATION
■ User set mode
User set mode is accessed at power ON and allows you to
set seldom-changed settings. In this case you can “cus-
tomize” the transceiver operation to suit your preferences and
operating style.
set seldom-changed settings. In this case you can “cus-
tomize” the transceiver operation to suit your preferences and
operating style.
Entering the user set mode:
q While pushing and holding [P1]
q While pushing and holding [P1]
and [P2], rotate [VOL] to turn
the power ON. Then, push and
hold [P0] to enter user set
mode.
the power ON. Then, push and
hold [P0] to enter user set
mode.
w Push [P0] several times to
select the appropriate item.
Then, push [Up] or [Down] to
set the desired level/condition.
Then, push [Up] or [Down] to
set the desired level/condition.
• Available set mode functions are
Backlight, LCD Contrast, Beep,
Beep Level, SQL Level, AF Min
Level, Mic Gain, Vox Gain, Vox
Delay Battery Voltage and Signal
Moni.
Beep Level, SQL Level, AF Min
Level, Mic Gain, Vox Gain, Vox
Delay Battery Voltage and Signal
Moni.
e Rotate [VOL] to turn the power
OFF to exit set mode.
NOTE: User set mode is also
available via a programmable
key. Please refer to p. 10 [User
Set Mode] section.
available via a programmable
key. Please refer to p. 10 [User
Set Mode] section.
[P0]
[P1]/[P2]
[VOL]
[P0]
[Down]
[Up]
[VOL]
3
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page 17 (1,1)