Crestron mmk-15l wmkm-15l User Manual

Crestron MMK-15L & WMKM-15L 

 

Mud Mount Kits

When cutouts made in the drywall for touchpanel installation are too large, Mud 
Mount Kits are the preferred mounting option for the Crestron Isys

®

 TPS-15L and 

TPS-15G-L series of wall mounted touchpanels as well as the Isys i/O™  
TPMC-15-QM-L and TPMC-15-CH-L series of wall mounted touchpanels. These 
kits provide support for additional plastering that can be applied to hide large 
irregularities in the touchpanel cutout.  

NOTE: If mounting into another material (other than drywall – for example, wood 
lectern, concrete, or rock) use the mounting plate, available in the post-construction 
kit WMKM-15 as a hole cutout template. For concrete and rock mounting material, 
allow for proper ventilation before mounting the touchpanel. 

There are two Mud Mount Kits. The MMK-15L is a pre-construction accessory. Pre-
construction refers to framed walls prior to hanging drywall. This accessory must be 
used with either the Pre-Construction Mount Kit (PMK-15L) or Back Box Kit  
(BB-15L). 

The WMKM-15L is a post-construction kit. Post-construction refers to framed walls 
with drywall hung. This accessory is designed with a mounting plate so that it can be 
placed anywhere on a wall without the support from a stud. 

NOTE:  If necessary, consult the latest revision of the TPS-12L/15L/17L Operations 
Guide (Doc. 6355), the TPS-12G/15G-L Operations Guide (Doc. 6356), or the 
TPMC-15/17-L Series Operations Guide (Doc. 6354) for a complete list of mounting 
options. 

The MMK-15L consists of three parts. These parts produce an assembly that attaches 
to the PMK-15L or BB-15L. The WMKM-15L consists of the same three parts that 
make up the MMK-15L as well as one mounting plate. The mounting plate is the 
part that provides the necessary support for post-construction applications. 

•  1