Terratec sine mb 33 ii User Manual
The rear panel:
17. OUTPUT: Output socket (1/4" mono jack)
18. RES ADJUST: Maximum resonance adjuster (resonance strength with resonance
control on full)
19. VCF INPUT: Connector for processing external audio signals with the VCF
20. 12 V AC: AC power adapter (alternating current)
21. MIDI INPUT: MIDI data applied to this input affect the audio signal generation and
MIDI-controllable parameters of the SINE MB 33 II.
22. MIDI THRU: MIDI feed-through socket
23. MIDI OUTPUT: Controller data output of the edited parameters
24. MIDI CHANNEL: Selector for MIDI send and receive channels (1 - 16)
Properties
n
n
n
n
n
n
Monophonic bass synthesizer
Analog audio generation—the audio signal generation of the MB33II is purely analog
and is based on the traditional VCO-VCF-VCA-ENV principle. The VCO features
sawtooth and square-wave (with pulse width modulation) waveforms and an additional
sub-oscillator (square-wave). The VCF is an 18 dB low-pass filter with an adjustable
cutoff frequency and resonance. The envelope generator (ENV) with its adjustable
decay time modulates the cutoff frequency and the pulse width of the square wave.
The MB33II also features "groove functions" such as Accent, Autoslide and Distortion.
and is based on the traditional VCO-VCF-VCA-ENV principle. The VCO features
sawtooth and square-wave (with pulse width modulation) waveforms and an additional
sub-oscillator (square-wave). The VCF is an 18 dB low-pass filter with an adjustable
cutoff frequency and resonance. The envelope generator (ENV) with its adjustable
decay time modulates the cutoff frequency and the pulse width of the square wave.
The MB33II also features "groove functions" such as Accent, Autoslide and Distortion.
MIDI control of Cutoff, Resonance, ENV MOD, Decay, Accent and Distortion.
Processing of external audio signals by the VCF.
SINE MB 33 II (English)
7