Terratec sine mb 33 ii User Manual
Getting started
1. Set the MIDI-CHANNEL to the desired channel. The illustration below shows the
switch positions assigned to the MIDI channels 1-16:
Note: controller messages related to MIDI-enabled parameters and note
messages are only received and processed on the currently selected MIDI
channel of the SINE MB 33 II.
messages are only received and processed on the currently selected MIDI
channel of the SINE MB 33 II.
2. Connect the output of the SINE MB 33 II to a mixer, amplifier or other suitable
equipment. Take care and turn down the volume of both devices first.
3. To control the SINE MB 33 II, connect the MIDI IN socket to the MIDI OUT (or THRU)
of a MIDI controller device (computer, keyboard, sequencer, etc.). Ensure that the
preset receive channel of the SINE MB 33 II corresponds to the send channel of the
MIDI controller.
preset receive channel of the SINE MB 33 II corresponds to the send channel of the
MIDI controller.
4. Connect the included power adapter to the AC socket of the SINE MB 33 II.
5. The SINE MB 33 II will autotune itself when it is switched on. As soon as the tuning
operation is complete, the MIDI LED will go out and the synthesizer will be
operational. The POWER LED will remain lit for as long as the device remains
switched on. When sending notes to the SINE MB 33 II via MIDI, the MIDI LED will
light up in sync with the notes.
operational. The POWER LED will remain lit for as long as the device remains
switched on. When sending notes to the SINE MB 33 II via MIDI, the MIDI LED will
light up in sync with the notes.
8
SINE MB 33 II (English)