Terratec sine pa User Manual
The rear panel:
12. INPUT 4:
channel 4 input, 1/4" mono jack
13. INPUT 3 (3/4 BRIDGE):
channel 3 or 3/4 bridged input, 1/4" mono
jack
14. INPUT 3/4:
channel 3/4 input, cinch
15. INPUT SOURCE:
input selector, cinch/jack
16. OUTPUT SOURCE (3/4, 1/2): switches signal from Input 1/2 to OUTPUT 3/4
17. OUTPUT 4:
speaker connection, channel 4
18. OUTPUT 3:
speaker connection, channel 3
19. AC IN:
AC power input
20. OUTPUT 2:
speaker connection, channel 2
21. OUTPUT 1:
speaker connection, channel 1
22. INPUT SOURCE:
input selector, cinch/jack
23. INPUT 1/2:
channel 1/2 input, cinch
24. INPUT 2:
channel 2 input, 1/4" mono jack
25. INPUT 1 (1/2 BRIDGE):
channel 1 or 1/2 bridged input, 1/4" mono
jack
Function
The SINE PA 460 studio power amplifier is designed for installation in 19" racks. Please
ensure that it gets adequate ventilation.
ensure that it gets adequate ventilation.
Use the included power cable to connect the PA 460 to an AC power source. Connect
both inputs to the outputs of your mixer and the outputs to your speakers (4-8 ohm). Turn
all VOLUME controls completely down.
both inputs to the outputs of your mixer and the outputs to your speakers (4-8 ohm). Turn
all VOLUME controls completely down.
Both LEDs will light up when the power is switched on. The MUTE (Protect) LED will go
out after 1 to 2 seconds. The power-up delay needs around 10 seconds to become active
after turning the amplifier off briefly. After turning off the amplifier's power, wait at least 10
seconds before turning it back on to prevent damaging your speakers (power-on click).
out after 1 to 2 seconds. The power-up delay needs around 10 seconds to become active
after turning the amplifier off briefly. After turning off the amplifier's power, wait at least 10
seconds before turning it back on to prevent damaging your speakers (power-on click).
SINE PA 120, PA 200, PA 460 (English)
11