Sennheiser EK 2000-DW User Manual
19
Adjusting settings via the operating menu
Canceling an entry
To subsequently return to the last edited menu item:
Exiting a menu item
To return to the next higher menu level:
To directly return to the current standard display:
Adjusting settings via the operating
menu
menu
The main menu “
Menu
”
Synchronizing a transmitter with the diversity receiver – “Sync”
You can synchronize a suitable transmitter of the 2000 series with the
receiver. By default, the following parameters are transferred to the trans-
mitter during synchronization:
receiver. By default, the following parameters are transferred to the trans-
mitter during synchronization:
왘
Press the
ON
/
OFF
button to cancel the entry.
The current standard display appears on the display panel.
왘
Press the
SET
button repeatedly until the last edited menu
item appears.
왘
Change to the “
Exit
” menu item.
왘
Confirm your selection.
왘
Press the
ON
/
OFF
button.
Setting
Transferred parameters
“
Frequency Preset
” Current receiving frequency (see page 23)
“
Name
”
Current name set for the receiver (see page 23)
“
Pilot Tone
”
Current pilot tone setting of the receiver
(“
(“
Inactive
”/“
Active
”, see page 27)
ON/OFF
SET
Menu
Exit
SET
ON/OFF