Sennheiser EK 2000-DW User Manual
20
Adjusting settings via the operating menu
To transfer these parameters:
왘
Switch the transmitter and the diversity receiver on.
왘
On the receiver, call up the “
Sync
” menu item.
“
Sync
” appears on the display panel of the receiver.
왘
Place the infra-red interface of the transmitter (see the instruction
manual of the transmitter) in front of the infra-red interface of the
receiver
manual of the transmitter) in front of the infra-red interface of the
receiver
.
The parameters are transferred to the transmitter. When the transfer
is completed, “
is completed, “
” appears on the display panel of the diversity
receiver. The receiver then switches back to the current standard
display.
display.
To cancel the transfer:
왘
Press the
ON/OFF
button
on the receiver.
“ ” appears on the display panel of the receiver. “ ” also appears if:
– no transmitter was found or the transmitter is not compatible,
– no transmitter was found and the synchronization process was
canceled after 30 seconds,
– you canceled the transfer.
Via the “
Sync Settings
” submenu, you can adjust additional
쐉