RadioShack pro-96 User Manual

 

65

You can configure your conventional, non-trunked channels for a 2 second delay to 

avoid missing reply traffic on the same channel. When delay is set for a conventional 

channel, the scanner will pause for reply traffic before resuming the scan operation.   

To toggle the delay setting for a channel, press./DELAY 

  Notes   

• 

Delay is automatically set as the default for each channel when you turn on the 

scanner. 

• 

The delay function operates differently when monitoring trunked radio systems. For 

more information, see “Trunked Delay Function” on Page 85. 

You can  lock out channels to force the scanner to skip and ignore  any traffic while 

scanning. You can also lock out up to 50 frequencies while searching to skip undesired 

transmissions. 

To lock out a channel while  scanning, press  L/OUT  when the  scanner stops on the 

channel. To  lock out a channel manually,  select the channel then press  L/OUT  so  L 

appears in the scanner’s display. 

  Notes   

• 

You can still manually select and monitor locked-out channels. 

• 

Locking out a channel with an active trunking control channel will disable monitoring 

of that trunking system.   

To remove the lockout from a channel, manually select the channel and press L/OUT so 

L disappears.