RadioShack pro-96 User Manual

 

67

To clear a locked-out frequency,  select that frequency (see  “Reviewing Locked-Out 

Search Frequencies” on Page 66), then press CLR. 

If all locked-out frequencies are  cleared within a channel storage bank,  Empty. 

Lockout list

 appears in the scanner’s display. 

1.  Press SEARCH. 

2.  Select the search bank in which you want to clear all locked-out frequencies. 

3.  Press FUNC then press L/OUT. Lockout list appears in the scanner’s display. 

4.  Press FUNC then 6. The scanner will display Confirm list clear? 1=Yes Press 

other key for NO

.  Press 1 to  clear all locked-out  frequencies.  List cleared 

appears for about 2 seconds. Press any key other than 1 to cancel clear. 

The scanner  defaults to the commonly used AM or FM/Digital  receive mode for each 

frequency range. The preset mode is correct in most cases. However, some amateur 

radio transmissions and trunked systems do not operate in the preset mode. If you try to 

listen to a transmission when the scanner is not set to the correct receive mode, the 

transmission might sound weak or distorted. 

To change the receive mode, repeatedly press MODE. The receive mode changes as 

follows: 

AM – configures the channel for AM mode 

FM/DIGITAL– configures the channel for the FM/DIGITAL mode 

CT – configures the channel for CTCSS mode 

DC – configures the channel for DCS mode 

MO  –  configures the channel for  the  MO mode for analog or digital Motorola trunking 

system channels, or APCO-25 trunking system channels