Pentax K-500 Operating Guide
121
Sh
oo
ting
Fu
nctio
ns
nctio
ns
4
3
Use the four-way controller (45)
to select Q or R, and press
the 4 button.
The camera returns to the control panel.
4
Press the shutter release button halfway.
The Shake Reduction function is
activated, and k appears in the status
screen, viewfinder, and Live View screen.
Q
Uses Shake Reduction. (default setting)
R
Does not use Shake Reduction.
• The Shake Reduction function is not available in the following situations.
- Self-timer shooting
- Remote Control shooting
- when p mode is set
- when HDR Capture is set, and the Auto Align function is disabled
- during Composition Adjustment
- when HDR Capture is set, and the Auto Align function is disabled
- during Composition Adjustment
• The Shake Reduction function is activated in Z (Night Scene HDR) of H
mode (except when shooting with the self-timer).
• The Shake Reduction function will not fully work (for about 2 seconds)
immediately after the camera is turned on or is restored from Auto Power Off.
Wait for the Shake Reduction function to become stable before shooting.
• You can also change the setting from the [A Rec. Mode 3] menu.
Shake Reduction
Shake Reduction
On
On
On
OK
OK
OK
Cancel
Cancel
MENU
K-500.book Page 121 Friday, June 14, 2013 2:29 PM