Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PTLZ370E
  5. Operating Guide

Panasonic PTLZ370E Operating Guide

Download
Page of 120
[PROJECTOR SETUP] menu
ENGLISH - 71
Settings
[DATE AND TIME]
You can set the time zone, date, and time of the built-
in clock of the projector.
By default, the time is set to +09:00.
▶
■To set the time zone
1)  Press ▲▼ to select [DATE AND TIME].
2)  Press the <ENTER> button.
▶
z
The 
[DATE AND TIME] screen is displayed.
3)  Press ▲▼ to select [TIME ZONE].
4)  Press ◀▶ to switch [TIME ZONE].
▶
■To adjust the date and time 
automatically
1)  Press ▲▼ to select [DATE AND TIME].
2)  Press the <ENTER> button.
▶
z
The 
[DATE AND TIME] screen is displayed.
3)  Press ▲▼ to select [ADJUST CLOCK].
4)  Press the <ENTER> button.
▶
z
The 
[ADJUST CLOCK] screen is displayed.
5)  Press ▲▼ to select [NTP 
SYNCHRONIZATION], and press ◀▶ 
to change the setting to [ON].
▶
z
The setting will change as follows each time 
you press the button.
[OFF]
[ON]
[OFF]
Does not synchronize NTP server.
[ON]
Synchronizes NTP server.
6)  Press ▲▼ to select [OK], and press 
the <ENTER> button.
▶
z
The setting of the date and time will be 
completed.
▶
■To adjust the date and time 
manually
1)  Press ▲▼ to select [DATE AND TIME].
2)  Press the <ENTER> button.
▶
z
The 
[DATE AND TIME] screen is displayed.
3)  Select [ADJUST CLOCK].
4)  Press the <ENTER> button.
▶
z
The 
[ADJUST CLOCK] screen is displayed.
5)  Press ▲▼ to select [NTP 
SYNCHRONIZATION], and press ◀▶ 
to change the setting to [OFF].
6)  Press ▲▼ to select the item to be set, 
and press ◀▶ to set the local date 
and time.
7)  Press ▲▼ to select [OK], and press 
the <ENTER> button.
▶
z
The setting of the date and time will be 
completed.
Note
 
z
To set the date and time automatically, the projector 
must be connected to the network.
 
z
If synchronization with the NTP server fails 
just after [NTP SYNCHRONIZATION] is turned 
[ON], or if [NTP SYNCHRONIZATION] is turned 
[ON] while the NTP server is not set, [NTP 
SYNCHRONIZATION] will return to [OFF].
 
z
Access the projector via a web browser to set 
the NTP server. Refer to “[Adjust clock] page” 
(
 page 85) for details.