Panasonic PTLZ370E Operating Guide
[PROJECTOR SETUP] menu
72 - ENGLISH
Settings
[TEST PATTERN]
Displays the test pattern built-in to the projector.
Settings of position, size, and other factors will not
be reflected in test patterns. Make sure to display the
input signal before performing various adjustments.
1) Press ▲▼ to select [TEST PATTERN].
2) Press the <ENTER> button.
2) Press the <ENTER> button.
▶
z
The test pattern is displayed.
3) Press ◀▶ to switch the various test
patterns.
▶
z
Press the <MENU> button or the <RETURN>
button to return to the sub-menu of
[PROJECTOR SETUP].
▶
■To display sequence of internal
test patterns
The setting will change as follows each time you
press ◀▶ .
Horizontal lines
All white
Vertical lines
Color bars
Dots
White cross on black background
Cross hatch
Black cross on white background
Note
z
The default screen is all white. If you assign this to
the <FUNC1> to <FUNC3> buttons, Cross hatch
becomes the default.
[INITIALIZE ALL]
You can return various setting values to the factory
default settings.
When you perform this function, the projector enters
standby mode to initialize.
1) Press ▲▼ to select [INITIALIZE ALL].
2) Press the <ENTER> button.
2) Press the <ENTER> button.
▶
z
[INITIALIZE ALL] is displayed.
▶
z
Password entry is required if you have set [ON]
in the [SECURITY] menu → [PASSWORD]
(
page 73).
3) Press ◀▶ to select [OK].
4) Press the <ENTER> button.
4) Press the <ENTER> button.
▶
z
The [NOW INITIALIZING...] screen appears,
and is followed by [POWER OFF.].
5) Press the <ENTER> button.
▶
z
Key operations other than the <ENTER> button
and the power
button are unavailable at
this time.
6) Wait until the power indicator <ON
(G)/STANDBY (R)> of the projector
illuminates or flashes red (the fan
stops).
7) Press the <OFF> side of the <MAIN
POWER> switch to turn off the power.
▶
z
The initial setting screen appears the next time
the projector is started. (
page 18)
Note
z
The projector usage time, lamp usage time, and
[NETWORK] settings are not initialized.
z
After performing initialization, the password is
returned to its factory default and [PASSWORD] is
set to [OFF].