Panasonic PT-DZ770E Operating Guide

Refer to “Navigating through the menu” 



 

z

After selecting the item, press ▲▼◀▶ to set.

You can increase the vertical resolution and enhance 

the picture quality by performing the cinema 

processing when the PAL (or the SECAM) 576i signal, 

the NTSC 480i, 1080/50i, and 1080/60i signals are 

input.

1)  Press ▲▼ to select [DIGITAL CINEMA 

2)  Press ◀▶ to switch [DIGITAL CINEMA 

▶

z

The setting will change as follows each time 

you press the button.

Performs automatic detection and 

cinema processing.

(Factory default)

Unforced cinema processing.

Forced cinema processing 

(2:2 pulldown) is performed when a 

576i or 1080/50i signal is input.

Forced cinema processing 

(2:2 pulldown) is performed when a 

480i or 1080/60i signal is input.

 

z

When a signal other than a 2:2 pulled-down signal 

is set to [25p FIXED] or [30p FIXED] in [DIGITAL 

CINEMA REALITY], picture quality deteriorates. 

(Vertical resolution will degrade.)

The blanking width is adjusted when there are noise 

at the edge of the screen or the image is slightly 

running out from the screen when an image from the 

VCR or other devices are projected.

1)  Press ▲▼ to select [BLANKING].
2)  Press the <ENTER> button.

▶

z

The 

[BLANKING] adjustment screen is 

displayed.

3)  Press ▲▼ to select the adjustment 

4)  Press ◀▶ to adjust the blanking.

▶

z

Adjustment values will change between 0 and 

959 for left and right, and between 0 and 599 

for top and bottom.

Press ◀ to move the 

blanking zone upward.

Press ▶ to move the 

blanking zone downward.

Press ▶ to move the 

blanking zone upward.

Press ◀ to move the 

blanking zone downward.

Press ▶ to move the 

blanking zone to the right.

Press ◀ to move the 

blanking zone to the left.

Press ◀ to move the 

blanking zone to the right.

Press ▶ to move the 

blanking zone to the left.