Panasonic PT-DZ770E Operating Guide

▶

■[THROUGH]

Pictures are displayed without changing the 

resolution of the input signals.

▶

■[16:9]

When standard signals

*1

 are input, the pictures are 

displayed with the aspect ratio converted to 16:9. 

When wide-screen signals

*2

 are input, the pictures 

are displayed without changing the aspect ratio.

▶

■[4:3]

When standard signals

*1

 are input, the pictures 

are displayed without changing the aspect ratio. 

When wide-screen signals

*2

 are input, if [4:3] is 

selected with [SCREEN FORMAT], the pictures 

are displayed with the aspect ratio converted to 

4:3. When [SCREEN FORMAT] is other than [4:3], 

the pictures are displayed without changing the 

aspect ratio so that they will fit in the 4:3 screen.

▶

■[H FIT]

The pictures are displayed using the entire width 

of the screen range selected with [SCREEN 

FORMAT]. When signals have the aspect ratio 

vertically longer than the aspect ratio of the screen 

selected with [SCREEN FORMAT], the pictures 

are displayed with the top and bottom parts cut 

off.

▶

■[V FIT]

The pictures are displayed using the entire height 

of the screen range selected with [SCREEN 

FORMAT]. When signals have the aspect ratio 

horizontally longer than the aspect ratio of the 

screen selected with [SCREEN FORMAT], the 

pictures are displayed with the right and left parts 

cut off.

▶

■[HV FIT]

The pictures are displayed in the entire screen 

range selected with [SCREEN FORMAT]. When 

the aspect ratio of the input signals differs 

from that of the screen range, the pictures are 

displayed with the aspect ratio converted to that of 

the screen selected with [SCREEN FORMAT].

*1:  Standard signals are input signals with an aspect ratio of 4:3 

or 5:4.

*2:  Wide-screen signals are input signals with an aspect ratio 

of 16:10, 16:9, 15:9 or 15:10.

 

z

Some size modes are not available for certain types 

of input signals. [DEFAULT] cannot be selected for 

NTSC signals.

 

z

If an aspect ratio which is different from the aspect 

ratio for the input signals is selected, the pictures 

will appear differently from the originals. Be careful 

of this when selecting the aspect ratio.

 

z

If using this projector in places such as cafes 

or hotels to display programs for a commercial 

purpose or for public presentation, note that 

adjusting the aspect ratio or using the zoom 

function to change the screen pictures may be an 

infringement of the rights of the original copyright 

owner for that program under copyright protection 

laws. Take care when using a function of the 

projector such as the aspect ratio adjustment, zoom 

function, etc.

 

z

If conventional (normal) 4:3 pictures which are 

not wide-screen pictures are displayed on a wide 

screen, the edges of the pictures may not be visible 

or they may become distorted. Such pictures 

should be viewed as with an aspect ratio of 4:3 in 

the original format intended by the creator of the 

pictures.

You can adjust the size of the projected image.

1)  Press ▲▼ to select [ZOOM].
2)  Press the <ENTER> button.

▶

z

The 

[ZOOM] screen is displayed.

3)  Press ▲▼ to select [VERTICAL] or 

[HORIZONTAL], then press ◀▶ to 

▶

■When [ASPECT] is set to 

1)  Press ▲▼ to select [MODE].
2)  Press ◀▶ to switch [MODE].

Enlarges the size within the 

aspect range set with [SCREEN 

FORMAT].

Enlarges the size to the entire 

display area set with [SCREEN 

FORMAT].