Panasonic PT-DZ770E Operating Guide
[DISPLAY OPTION] menu
58 - ENGLISH
Settings
Select [DISPLAY OPTION] from the main menu,
and select the item from the sub-menu.
Refer to “Navigating through the menu”
(
page 44) for the operation of the menu
screen.
z
After selecting the item, press ▲▼◀▶ to set.
[COLOR MATCHING]
You can correct the color difference between the sets
when multiple sets are to be used simultaneously.
1) Press ▲▼ to select [COLOR MATCHING].
2) Press ◀▶ to switch [COLOR MATCHING].
2) Press ◀▶ to switch [COLOR MATCHING].
▶
z
The setting will change as follows each time
you press the button.
[OFF]
[3COLORS]
[MEASURED]
[7COLORS]
[OFF]
Color matching adjustment is not
carried out.
[3COLORS] The three colors [RED], [GREEN],
and [BLUE] can be adjusted.
[7COLORS]
The seven colors [RED], [GREEN],
[BLUE], [CYAN], [MAGENTA],
[YELLOW], and [WHITE] can be
adjusted.
[MEASURED]
Refer to “To use a colorimeter
to adjust the color matching”
(
page 59) for details about this
mode.
▶
■To set [3COLORS] or [7COLORS]
3) Select [3COLORS] or [7COLORS] in
Step 2).
4) Press the <ENTER> button.
▶
z
The
[3COLORS] or [7COLORS] screen is
displayed.
5) Press ▲▼ to select [RED], [GREEN], or
[BLUE] (for [7COLORS], select[RED],
[GREEN], [BLUE], [CYAN], [MAGENTA],
[YELLOW], or [WHITE]).
6) Press the <ENTER> button.
▶
z
The
[3COLORS:RED], [3COLORS:GREEN],
[3COLORS:BLUE], or [3COLORS:WHITE]
screen is displayed.
In the case of
[7COLORS], the
[7COLORS:RED], [7COLORS:GREEN],
[7COLORS:BLUE], [7COLORS:CYAN],
[7COLORS:MAGENTA],
[7COLORS:YELLOW], or [7COLORS:WHITE]
screen is displayed.
7) Press ◀▶ to adjust.
▶
z
Adjustment value will change between 0
*1
and
2 048.
*1: The lower limit differs depending on the color to be
adjusted.
Note
z
Operation when correcting the adjustment color
When the adjustment color and the same correction
color are moved:
The luminance of the adjustment color will change.
When correction color red is changed: Red is
added to or subtracted from the adjustment color.
When correction color green is changed: Green is
added to or subtracted from the adjustment color.
When correction color blue is changed: Blue is
added to or subtracted from the adjustment color.
z
This adjustment should be carried out by a person
who is familiar with the projector or by a service
person because a high level of skill is required to
make a successful adjustment.
z
Pressing the <DEFAULT> button will restore the
factory default settings for all items.
z
When [COLOR MATCHING] is set to other than
[OFF], [AI] and [COLOR CORRECTION] are fixed
to [OFF], and [COLOR TEMPERATURE] is fixed
to [USER]. (However, [WHITE BALANCE HIGH]
cannot be adjusted.)
z
If [3COLORS:WHITE] is selected, only [GAIN] can
be adjusted.
[DISPLAY OPTION] menu