Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PT-DZ770E
  5. Operating Guide

Panasonic PT-DZ770E Operating Guide

Download
Page of 124
[DISPLAY OPTION] menu
ENGLISH - 59
Settings
▶
■To use a colorimeter to adjust the 
color matching
Use a colorimeter that can measure chromaticity 
coordinates and luminance to change the colors 
[RED], [GREEN], [BLUE], [CYAN], [MAGENTA], 
[YELLOW], and [WHITE] to desired colors.
▶
z
Inputting the current luminance and 
chromaticity coordinates
1)  Press ▲▼ to select [COLOR 
MATCHING].
2)  Press ◀▶ to select [MEASURED].
3)  Press the <ENTER> button.
▶
z
The 
[MEASURED MODE] screen is displayed.
4)  Press ▲▼ to select [MEASURED 
DATA].
5)  Press the <ENTER> button.
▶
z
The 
[MEASURED DATA] screen is displayed.
6)  Measure the luminance (Y) and the 
chromaticity coordinates (x, y) using 
the colorimeter.
7)  Press ▲▼ to select a color, and press 
◀▶ to adjust the setting.
8)  Once all the input is completed, press 
the <MENU> button.
▶
z
The 
[MEASURED MODE] screen is displayed.
▶
z
Inputting the coordinates of a desired 
color
9)  Press ▲▼ to select [TARGET DATA].
10)  Press the <ENTER> button.
▶
z
The 
[TARGET DATA] screen is displayed.
11)  Press ▲▼ to select a color and press 
◀▶ to input coordinates for desired 
colors.
12)  Once all the input is completed, press 
the <MENU> button.
Note
 
z
Colors are not displayed properly when target data 
is a color outside the region of this projector.
 
z
Set the [AUTO TESTPATTERN] to [ON] to 
automatically display a test pattern for use in 
adjusting the selected adjustment colors.
 
z
When using a colorimeter or similar instrument to 
measure measurement data, measure the colors 
displayed with [AUTO TESTPATTERN].
 
z
A difference in the color coordinates of target 
data and measurement values obtained from an 
instrument may occur for certain instruments and 
measurement environments used.
[COLOR CORRECTION]
Colors can be adjusted and registered for each input 
signal format.
1)  Press ▲▼ to select [COLOR 
CORRECTION].
2)  Press ◀▶ to switch [COLOR 
CORRECTION].
[OFF]
Standard setting
[USER]
For each of the four signal formats, 
VIDEO, S-VIDEO, RGB, and 
YC
B
C
R
/YP
B
P
R
, six colors including 
red, green, blue, cyan, magenta, 
and yellow can be adjusted and 
registered. Press the <ENTER> 
button to set details.
[CONTRAST MODE]
There are two modes. Set according to the operating 
environment.
1)  Press ▲▼ to select [CONTRAST MODE].
2)  Press ◀▶ to switch [CONTRAST MODE].
[NORMAL]
Maximizes brightness.
[HIGH]
Maximizes contrast.