Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PT-DZ770E
  5. Operating Guide

Panasonic PT-DZ770E Operating Guide

Download
Page of 124
[PROJECTOR SETUP] menu
66 - ENGLISH
Settings
[PROJECTOR SETUP] menu
Select [PROJECTOR SETUP] from the main 
menu, and select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 44) for the operation of the menu 
screen.
 
z
After selecting the item, press ▲▼◀▶ to set.
[PROJECTOR ID]
The projector has an ID number setting function that 
can be used when multiple projectors are used side 
by side to enable simultaneous control or individual 
control via one remote control.
1)  Press ▲▼ to select [PROJECTOR ID].
2)  Press ◀▶ to switch [PROJECTOR ID].
▶
z
The setting will change as follows each time 
you press the button.
[ALL]
[1]
[64]
[2]
Note
 
z
The ID number can be set to a value from [ALL], [1] 
to [64].
 
z
To specify an ID number for individual control, the 
ID number of a remote control must match the ID 
number of the projector.
 
z
When the ID number is set to [ALL], the projector 
will operate regardless of the ID number specified 
during remote control or computer control.
If multiple projectors are set up side by side with IDs 
set to [ALL], they cannot be controlled separately 
from the projectors with other ID numbers.
 
z
Refer to “Setting Remote control ID numbers” 
(
 page 22) regarding the method to set the ID 
number on the remote control.
[PROJECTION METHOD]
Set the projection method in accordance with the 
installation status of the projector.
Change the projection method if the screen display is 
upside down or inverted.
1)  Press ▲▼ to select [PROJECTION 
METHOD].
2)  Press the <ENTER> button.
▶
z
The 
[PROJECTION METHOD] screen is 
displayed.
3)  Press ▲▼ to select the projection 
method.
[FRONT/FLOOR] When installing on the desk, etc., 
in front of the screen
[FRONT/CEILING]
When installing using the 
ceiling mount bracket (optional 
accessories) in front of the 
screen
[REAR/FLOOR]
When installing on the desk, 
etc., behind the screen (using a 
translucent screen)
[REAR/CEILING]
When installing using the 
ceiling mount bracket (optional 
accessories) behind the screen 
(using a translucent screen)
4)  Press the <ENTER> button.
5)  When the confirmation is displayed, 
select [OK] or [CANCEL], and press 
the <ENTER> button.
Attention
 
z
When [PROJECTION METHOD] is changed, 
confirm that [COOLING CONDITION] (
 page 67) is 
set correctly.